Penrite Dot 3 Brake Fluid 500mL

Penrite Brake Fluid Dot 3 500 ML

DOT 3 BRAKE FLUID is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications.

APPLICATION

• DOT 3 BRAKE FLUID is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3 brake & clutch hydraulic fluid.
• DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluid.
• DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid DOT 3 prior to first fill or before refilling the system.
• DOT 3 BRAKE FLUID should be changed according to the manufacturers service specifications.

PLEASE NOTE

• Do not mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
• For vehicles that require mineral based products i.e. Citroen, Penrite LHM Plus should be used.
• Not mixable with Silicone type assembly compounds
• Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.

CAUTION
Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.

Benefits :

• Excellent braking response due to the high boiling point of the fluid
• High wet boiling point ensures long term retention of the fluid performance
• Compatible with all common brake system materials

Specifications :

• PRODUCT PERFORMANCE LEVELS
• AS 1960-2005 Grade 1
• DOT 3
• ISO 4925 Class 3
• SAE J1703
• US FMVSS No 116 DOT 3