Motorex Moto Clean Plus 1L (6) [304371]

Motorex Moto Clean Plus 1L Features:

• Lower pH value formula
• Better distribution over surfaces
• Excellent compatibility with rubber, plastics and metal
• Can be used overhead thanks to the MOTOREX 360° technology and special spray head
• Ready to use but can also be used diluted to a ratio of 1:3 for cleaning small amounts of dirt
• Pump spray bottle can be reused multiple times with the 5-litre refill

Application

First, test on a small hidden area to check tolerance • Then, when the motorcycle is cold, briefly spray it with water • Next, adjust the Motorex Moto Clean Plus spray nozzle to produce a fine spray (foamy) • Spray the motorcycle (when cold) from a distance of approx. 50 cm, leave to take effect (max. 3 mins) and then rinse off with plenty of water • If necessary, use a sponge or Motorex brush on very dirty areas • Do not apply in direct sunlight • Do not leave to dry

Dosage

Motorex Moto Clean Plus is ready for use and does not need to be diluted. For small amounts of dirt, Motorex Moto Clean Plus can be diluted to a concentrate/water ratio of 1:3 and applied as described above. To clean carbon components, apply a solution diluted to a ratio of at least 1:1 due to material sensitivity